THT-10 series of high frequency communication power sources follow the latest developments in the development of international communication power technology, and use advanced power control technology and devices. Advanced modular design and automatic flow sharing technology, so that the system capacity can be easily expanded by N+1 backup. It has good electromagnetic compatibility. Full intelligent design, configuration centralized monitoring unit, with three remote (telemetry, remote and remote control) function, the realization of computer management. It can communicate with remote monitoring center to realize unattended, and meet the requirements of modern communication technology development. Widely used in access network, medium and small scale agriculture bureau, transmission relay station; satellite microwave communication station, railway, electricity and other special equipment; communication.

technical parameter

Rated input voltage: single phase 220V AC

Fluctuating voltage range: 130VAC-300VAC

Output voltage: DC48V + 20%

The input power factor is not less than 0.99 (full)

Maximum discharge current of second stage lightning protection: 40KA

Weighbridge noise voltage < 2mV

Peak to peak noise voltage: less than 200mV (20MHZ band)

Efficiency: 90% (rated full load)

Order notes

Please indicate the system load

Load loop capacity and quantity

If special requirements are required, it can be designed and processed as required.

THT-20 series intelligent phase controlled communication power supply

Scope of application

THT-20 series intelligent phased communication power supply system is widely used in access network, farm work, medium and small scale Bureau, transmission relay station, microwave, satellite communication station, railway and power communication special equipment.

System characteristics

The THT-20 series intelligent phased communication power supply adopts SIEMENS S7 series programmable controller as the main control unit. The 5.7 inch LCD touch screen is used as the human-machine interface. Users can monitor and control the system only through touch screen interface. The main circuit uses a full bridge controlled rectifier circuit, and the trigger circuit uses programmable integrated circuit.

The system can be configured with two sets of batteries, parallel operation, one set of running and one set of spare. When the parameters are set, the system can run automatically without manual operation and automatically completes the charge management of the battery pack. The system can operate automatically after the power supply is stopped and the power is reconnected. The complete set of equipment is convenient to operate, reliable in work, complete in protection and high in automation. It can be used as a reliable power supply for 48V communication.

Input voltage: two AC380V

Output voltage: DC40V ~ 72V (continuous set)

Voltage accuracy: less than 1%

Current accuracy: less than 1%

Ripple coefficient: < 1%

Conversion efficiency: 75% (full)

Insulation resistance: 1010M ohm

Noise: less than 55dB (before and after the closure of the door 1 meters)

Order notes

Please specify the system load

Load loop capacity and quantity

If special requirements are required, it can be designed and processed as required.